7100316601 Scotch-Brite Surface Conditioning Low Stretch Roll, SC-RW, A/O Very Fine, 48 in x 82 ft

3M Sales UPC: 00638060628133; 3M 5-Digit Part Number: 62813; 3M Previous Stock Number: UU012825020; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: No Data; Ship Container Length: No Data; Ship Container Height: No Data; Ship Container Width: No Data; Ship Container Volume: No Data; Ship Container Weight: No Data; Shelf Life: 3650 Days; Country of Origin: USA; ECCN Number: No Data; Harmonizing Code: No Data; Transport Protective Service: No Data; NMFC Item: No Data; NMFC Sub: No Data; NMFC Class: No Data; US DOT, 49 CFR Ground: No Data; US DOT, 49 CFR Vessel: No Data; International Air Transport Association (IATA): No Data; International Maritime Organization (IMO): No Data. Product Information: Scotch-Brite™ Surface Conditioning Low Stretch Roll effectively blends, deburrs, finishes and cleans a variety of substrates. It can also be used for light grinding. The versatility of the Scotch-Brite™ Surface Conditioning Low Stretch Roll makes it a good all-purpose product..

Low-Stretch Backing Steadies The Abrasive
Our Scotch-Brite™ Surface Conditioning Low Stretch Roll has all the benefits operators expect from Scotch-Brite™ products, including nonwoven technology and a uniform cut. The low-stretch backing sets it apart. A low-stretch, reinforced backing keeps the abrasive side taut and firm as it abrades the surface.

Benefits of Open Web
Nonwoven technology makes our Scotch-Brite™ abrasives unique. We intersperse abrasive mineral on synthetic fibers using resin – creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not get worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish – part after part.