7100231754 Scotch-Brite Production Clean and Finish Disc, PR-DC, A/O Very Fine, 1-1/2 in x 1/8 in, 300 ea/Case

3M Sales UPC: 00689330199105; 3M 5-Digit Part Number: 19910; 3M Previous Stock Number: UU011064563; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50689330199100; Ship Container Length: 31.750 (Centimeter); Ship Container Height: 3.543 (Centimeter); Ship Container Width: 31.750 (Centimeter); Ship Container Volume: 3571.565 (Cubic centimeter); Ship Container Weight: 1640.140 (Gram); Shelf Life: 3650 Days; Country of Origin: Canada; ECCN Number: EAR99; Harmonizing Code: 6805301000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 149240; NMFC Sub: 03; NMFC Class: 250.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: Scotch-Brite™ Production Clean and Finish Disc delivers high cut, long life, a fine finish, and is effective for conditioning aluminum, stainless steel, plastics, wood, and fiberglass. The disc is designed for fine finishing, paint prepping, and scratch blending, and conforms well to irregular surfaces for a clean, consistent finish without undercutting or damaging the base material..

Dense Disc Produces Fine Finish on Solid Surfaces
Our Scotch-Brite™ Production Clean and Finish Disc is engineered to achieve a fine finish on solid surfaces, painted panels, and other materials. Non-woven, open-web runs cool and resists loading to provide a consistent level of abrasive conditioning over the life of the disc. Compared to our standard Scotch-Brite™ Clean and Finish Disc, this Production disc is denser and more resistant to tearing.

We manufactured the Scotch-Brite™ Production Clean and Finish Disc using Very Fine grade aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

The Scotch-Brite™ Advantage
Non-woven technology makes our Scotch-Brite™ abrasives unique. We intersperse abrasive mineral on synthetic fibers using resin – creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not get worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish – part after part.