7100204280 3M Plastic Adhesive 2262, Clear, 55 Gallon (52 Gallon Net), Drum

3M Sales UPC: 00638060403174; 3M 5-Digit Part Number: 40317; 3M Previous Stock Number: 62226295301; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50638060403179; Ship Container Length: 0.605 (Meter); Ship Container Height: 0.886 (Meter); Ship Container Width: 0.605 (Meter); Ship Container Volume: 324.298 (Cubic decimeter); Ship Container Weight: 214.730 (Kilogram); Shelf Life: 912 Days; Country of Origin: USA; ECCN Number: No Data; Harmonizing Code: No Data; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 044500; NMFC Sub: 02; NMFC Class: 092.5; US DOT, 49 CFR Ground: UN1133, ADHESIVES, 3, II; US DOT, 49 CFR Vessel: UN1133, ADHESIVES, 3, II, -020C; International Air Transport Association (IATA): FORBIDDEN PACKAGE SIZE EXCEEDS IATA QUANTITY LIMITATIONS; International Maritime Organization (IMO): UN1133, ADHESIVES, 3, II, -020C. Product Information: 3M™ Plastic Adhesive 2262 dries quickly with an open time of approximately 20 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water and the sun. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration..

Ideal for Vinyl & Plastic
Our 3M™ Plastic Adhesive 2262 bonds to a variety of substrates – primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather – as well as plastics, for a strong, enduring bond.

Recommended Applications

• Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding)
• Aftermarket automotive repair, including panel installation and upholstery
• Banners and awnings
• General industrial
• MRO

Speed Up the Bonding Process 
With 3M™ Plastic Adhesive 2262 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature that will not yellow when exposed to UV or sunlight.

Applying Your Adhesive
Whether it is being brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. The application of one coat should prove sufficient for most surfaces. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.