7100167490 3M Cold Shrink QS-III Splice Kit 5514A-350-AL, 350 kcmil, 1/case

3M Sales UPC: 00054007441069; 3M 5-Digit Part Number: 44106; 3M Previous Stock Number: 80611207558; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50054007441064; Ship Container Length: 65.278 (Centimeter); Ship Container Height: 21.082 (Centimeter); Ship Container Width: 19.558 (Centimeter); Ship Container Volume: 26915.540 (Cubic centimeter); Ship Container Weight: 4535.923 (Gram); Shelf Life: 36 Months; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 8546900000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 061205; NMFC Sub: 00; NMFC Class: 110.0; US DOT, 49 CFR Ground: NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION; US DOT, 49 CFR Vessel: NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION; International Air Transport Association (IATA): NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION; International Maritime Organization (IMO): NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION. Product Information: The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).. The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.