Product Overview

3M Sales UPC: 00638060141113; 3M 5-Digit Part Number: 14111; 3M Previous Stock Number: 70007516290; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 00638060141113; Ship Container Length: 49.212 (Centimeter); Ship Container Height: 22.225 (Centimeter); Ship Container Width: 21.272 (Centimeter); Ship Container Volume: 23265.967 (Cubic centimeter); Ship Container Weight: 4555.881 (Gram); Shelf Life: 730 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3919905060; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 157320; NMFC Sub: 08; NMFC Class: 085.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21320 Yellow is designed for mounting flexographic photopolymer print plates to print sleeves or steel cylinders. It features the Comply™ Adhesive System, which has the air release feature designed into the tape. This plate-mounting sticky-back yellow foam tape provides high-quality medium soft print..

Optimal, Consistent, Productive Flexographic Plate Mounting
3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21320 Yellow is a yellow foam tape that provides high quality medium soft combination print. It has the air release feature designed into the tape to allow for bubble-free mounting and predictable, repeatable print results. This flexographic plate mounting tape is tolerant of ink contaminants and has a dependable adhesive that resists lifting on press yet removes cleanly from the print plate and the cylinder or sleeve. It is up to 78% easier to remove the flexographic photopolymer plate from this tape* and up to 54% easier to remove the tape from a sleeve** to help keep print operations productive.

*Compared to 3M™ Cushion-Mount™ Plus H-Series Plate Mounting Tapes
** Compared to 3M™ Cushion-Mount™ Plus E-, H- and L-Series Plate Mounting Tapes

Recommended Applications

Flexographic printing, flexographic printers
Mounting photopolymer plates to flexographic printing cylinders and sleeves
Used in combination, process and solid printing processes
3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry

3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high-speed print runs.

This cushion tape is manufactured for 20 mil applications. It is constructed with differential acrylate adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting photopolymer plates. The adhesive on the non-linered (sleeve / cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.

On Easy with Reduced Air Entrapment
The 3M™ Comply™ Adhesive System features a crosshatch pattern of unique micro-channels that allow air to escape more easily than from mounting tapes using a pebbled or flat adhesive surface. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.

Where Science Meets Craft
Printers are passionate about every job looking the best it can. For decades, 3M products have been there helping to improve the quality of the work that goes out and the efficiency of how it gets done.