7100072921 3M Secondary Liner 7526L, Tan, 4.2 mil, Roll, Config

3M Sales UPC: No Data; 3M 5-Digit Part Number: o Dat; 3M Previous Stock Number: 70000093875; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: No Data; Ship Container Length: No Data; Ship Container Height: No Data; Ship Container Width: No Data; Ship Container Volume: No Data; Ship Container Weight: No Data; Shelf Life: 547 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: No Data; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 150930; NMFC Sub: 02; NMFC Class: 060.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ Secondary Release Liner 7526L is a tan-colored, 4.2 mil polycoated kraft liner with a release coating on both sides, designed specifically for use with 3M screen printable adhesives. This liner is designed to provide moisture stability and resist wrinkling and curling. This secondary release liner is commonly used for downstream processing and/or stacking..

Designed for Use with Screen Printable Adhesives
3M™ Secondary Release Liner 7526L is a tan-colored, 58# polycoated kraft (PCK) liner with a release coating on both sides. The gloss side (interior of roll) features a medium release silicone while the matte side has low release silicone for use with screen printable adhesives. This 4.2 mil liner resists wrinkling and curling. 3M™ Secondary Release Liner 7526L is designed to help to protect 3M screen printable adhesives during downstream processing or stacking.

Recommended Applications

• Hard tool die-cutting
• Screen-printing liner
• Wide web lamination

Application Techniques for Secondary Liners
A pressure of 1.5-20 psi is suggested during lamination to allow the adhesive to come into direct contact with the liner. Using a hard-edged plastic tool or roller, which is the full width of the laminated tape or part, helps to provide the necessary pressure at the point of lamination. The ideal adhesive application temperature range is 60°F (15°C) to 100°F (38°C).

Innovative Solution for the Printing World
In order to meet today’s complex printing world, 3M designed more than 150,000 combinations of adhesives, topcoats, facestocks and liners to meet industry demands. 3M™ Secondary Release Liner 7526L is one of these innovative solutions engineered to provide a technical solution and superior product that will help enhance your customers’ confidence in their image, product and process.