7010375259 3M Double Coated Tape 9738, Clear, 72 mm x 55 m, 4.3 mil, 16 Roll/Case

3M Sales UPC: 00051111187081; 3M 5-Digit Part Number: 18708; 3M Previous Stock Number: 70006650744; 3M Consumer UPC: 00051111187081; 3M Inner UPC: No Data; 3M Shipper UPC: 50051111187086; Ship Container Length: 31.400 (Centimeter); Ship Container Height: 31.600 (Centimeter); Ship Container Width: 31.400 (Centimeter); Ship Container Volume: 31156.336 (Cubic centimeter); Ship Container Weight: 13.725 (Kilogram); Shelf Life: 365 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 4811412100; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 157190; NMFC Sub: 00; NMFC Class: 060.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ Double Coated Tape 9738 Red is a double-sided tape mounted on a non-woven tissue carrier with a pressure sensitive acrylic adhesive that offers a balance of high initial adhesion and good holding power. It is mounted on a 55 lb. densified kraft paper liner for easy release and manipulation during application..

High Performance Adhesion
Our 3M™ Double Coated Tape 9738 Red is a 4.3 mil double-sided tape mounted on a 55 lb. densified kraft paper liner. In addition, it has a non-woven tissue carrier with a pressure sensitive acrylic adhesive that offers a balance of high initial adhesion and good holding power. It offers excellent temperature performance in various applications. When it comes to longevity, this tape will perform well up to 300°F/149°C in the short term, and up to 260°F/127°C for days or weeks. Results may vary depending on machine and web tensions, line speeds, nature of paper surface and application pressure. It adheres well to kraft and coated papers, and is commonly used for high performance splicing on paper, films and other continuous web processes.

Recommended Applications

• High-speed flying splices 
• Zero speed splices
• Core starting
• Splicing films, foils and corrugated paper

What is Double Coated Tape?
In general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in web processing, construction, fabrication, arts and hobby.