7010364781 3M Sanding and Finishing Disc Holder, 03051ES, 2 inch, 12 per case

3M Sales UPC: 00051131030510; 3M 5-Digit Part Number: 03051; 3M Previous Stock Number: 60455097323; 3M Consumer UPC: 00051131030510; 3M Inner UPC: 30051115608316; 3M Shipper UPC: 50051115608310; Ship Container Length: 27.622 (Centimeter); Ship Container Height: 8.890 (Centimeter); Ship Container Width: 15.557 (Centimeter); Ship Container Volume: 3820.170 (Cubic centimeter); Ship Container Weight: 397.346 (Gram); Shelf Life: No Data; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 8467990190; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 156600; NMFC Sub: 06; NMFC Class: 100.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ Sanding and Finishing Abrasive Disc Holder provides a support base for 2- or 3-inch 3M™ Roloc™ sanding or Scotch-Brite™ discs, helping maximize their abrasive performance. For convenience and ease of use, this disc holder is designed to lock easily and securely into a household drill or rotary tool..

Strip Away Paint, Primer and Rust
When used with a sanding or finishing disc, our 3M™ Sanding and Finishing Abrasive Disc Holder works to quickly strip away paint, primer and rust. The disc holder is designed to give you more and better control for a range of tasks in Stage 1 of the 3M™ Body Repair System.

Easy Disc Changes
3M™ Roloc™ attachment allows users to conveniently change discs with a simple twist-off, twist-on motion. Once the disc fully engages, it will stay securely in place until it is intentionally untwisted for removal.  The wide variety of available Roloc sanding discs (sold separately) allows swapping from one application to the next in seconds.

About the 3M™ Body Repair System
Even a small repair can seem complex at first. So 3M’s Body Repair System simplifies the entire automotive body repair process by dividing it into four stages:

Stage 1 – Prepare. This stage includes pulling dents, removal of paint and rust and efficient, effective masking of the area.

Stage 2 – Fill. This stage involves patching holes with reinforced filler and smoothing and shaping filler before painting.

Stage 3 – Paint. This stage includes painting the area and blending and smoothing primer and paint.

Stage 4 – Finish. The final stage for showroom-grade results: removing small defects, sealing and polishing clear coats and other painted surfaces.

3M supplies premium products such as abrasives, tapes, body fillers and tools for every stage. This system helps you work easily, efficiently and successfully across the entire body repair process.