Product Overview

3M Sales UPC: 00051115648168; 3M 5-Digit Part Number: 64816; 3M Previous Stock Number: 62280895301; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50051115648163; Ship Container Length: 0.596 (Meter); Ship Container Height: 0.906 (Meter); Ship Container Width: 0.596 (Meter); Ship Container Volume: 321.826 (Cubic decimeter); Ship Container Weight: 195.498 (Kilogram); Shelf Life: 273 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3506915000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 004620; NMFC Sub: 02; NMFC Class: 060.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ Scotch-Weld™ Structural Plastic Adhesive 8010FC is a fast curing, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation..

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive 8010FC also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. 3M formulated this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications

Joining plastics to metals, such as in the manufacture or repair of appliances
Bonding low surface energy plastics without priming
Impact resistance composite bonding
Manufacture or repair of various sporting goods equipment
Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010FC starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72°F/22°C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.