Product Overview

3M Sales UPC: 00021200225789; 3M 5-Digit Part Number: 22578; 3M Previous Stock Number: 62135985356; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50021200225784; Ship Container Length: 0.302 (Meter); Ship Container Height: 0.345 (Meter); Ship Container Width: 0.302 (Meter); Ship Container Volume: 31.465 (Cubic decimeter); Ship Container Weight: 18.425 (Kilogram); Shelf Life: 730 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3506915000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 044500; NMFC Sub: 02; NMFC Class: 092.5; US DOT, 49 CFR Ground: UN1133, ADHESIVES, 3, II; US DOT, 49 CFR Vessel: UN1133, ADHESIVES, 3, II, MARINE POLLUTANT, (ZINC OXIDE), -020C; International Air Transport Association (IATA): FORBIDDEN 3M PACKAGING DOES NOT MEET REGULATORY AGENCY REQUIREMENTS; International Maritime Organization (IMO): UN1133, ADHESIVES, 3, II, MARINE POLLUTANT, (ZINC OXIDE), -020C. Product Information: 3M™ Nitrile High Performance Plastic Adhesive 1099L dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration..

Ideal for Vinyl & Plastic
Our 3M™ Nitrile High Performance Plastic Adhesive 1099L bonds to a variety of substrates – primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather – as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.

Recommended Applications

Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding)
Aftermarket automotive repair, including panel installation and upholstery
Banners and awnings
General industrial
MRO

Speed Up the Bonding Process
With 3M™ Nitrile High Performance Plastic Adhesive 1099L you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications.

Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.