Product Overview
3M Sales UPC: 10093045937230; 3M 5-Digit Part Number: 93723; 3M Previous Stock Number: XA007707830; 3M Consumer UPC: 00909304593723; 3M Inner UPC: No Data; 3M Shipper UPC: 10093045937230; Ship Container Length: 731.000 (Millimeter); Ship Container Height: 219.000 (Millimeter); Ship Container Width: 236.000 (Millimeter); Ship Container Volume: 37781.004 (Cubic centimeter); Ship Container Weight: 2.912 (Kilogram); Shelf Life: 1825 Days; Country of Origin: Poland; ECCN Number: EAR99; Harmonizing Code: 3926909985; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 156600; NMFC Sub: 05; NMFC Class: 125.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: 3M™ PELTOR™ X1 Earmuffs X1A, Over-the-Head, 10 EA/Case. The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X1A is a lightweight, low-profile earmuff designed for protection against low-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as “dielectric”.
- The wire headband offers consistent pressure over prolonged wearing periods
- Earcup pivot points tilt for optimum comfort and efficiency
- Replaceable ear cushions and foam liners (hygiene kit HYX1)
- Noise Reduction Rating (NRR)b 22 dB. CSA Class A
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy™.
- The wire headband offers consistent pressure over prolonged wearing periods
- Earcup pivot points tilt for optimum comfort and efficiency
- Replaceable ear cushions and foam liners (hygiene kit HYX1)
- Noise Reduction Rating (NRR)b 22 dB. CSA Class A
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy™.
