7000046131 Scotch-Brite Cut and Polish Unitized Disc, 4-1/2 in x 7/8 in 5A FIN, 5ea/Case

3M Sales UPC: 00048011292045; 3M 5-Digit Part Number: 29204; 3M Previous Stock Number: 61500152402; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50048011292040; Ship Container Length: 0.162 (Meter); Ship Container Height: 0.157 (Meter); Ship Container Width: 0.147 (Meter); Ship Container Volume: 3.738 (Cubic decimeter); Ship Container Weight: 544.300 (Gram); Shelf Life: 3650 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 6805301000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 001020; NMFC Sub: 00; NMFC Class: 055.0; US DOT, 49 CFR Ground: NOT REGULATED; US DOT, 49 CFR Vessel: NOT REGULATED; International Air Transport Association (IATA): NOT REGULATED; International Maritime Organization (IMO): NOT REGULATED. Product Information: The Scotch-Brite™ Cut and Polish Unitized Disc was engineered to tackle your toughest deburring, blending and finishing needs. It assumes unitized form, meaning layers of abrasive material are compressed together to remove burrs and imperfections without wearing easily. As a disc, it also has great portability – moving in, on, over and around the workpiece..

Working Hard on Hard Metals
Our Scotch-Brite™ Cut and Polish Unitized Disc may be used as an alternative to conventional abrasive products such as rubber bonded discs and small set-up discs. It provides a consistent finish without cutting into the workpiece, reducing or even eliminating intermediate steps. Constructed with aluminum oxide mineral coated on a tough nylon web, this versatile disc is great for use on harder metals like stainless steel, carbon steel and high nickel alloys. The aluminum oxide disc may be used with regular attachment systems and fastened to a portable tool, such as a die grinder. The disc can be brought in direct contact with the workpiece and helps users tackle hard-to-reach areas.

The Cut and Polish Unitized Disc is available in two grades, fine (FIN) and medium (MED), so users may choose the right grade for their specific application. Typically, finer grades are used when operators desire a softer cut and finer finish. Conversely, a medium grade would be used when operators desire a more aggressive cut and coarser finish.

The Scotch-Brite™ Advantage
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers and yielding consistent results – part after part.