Product Overview
3M Sales UPC: 00051135081167; 3M 5-Digit Part Number: 08116; 3M Previous Stock Number: 60980109015; 3M Consumer UPC: 00051135081167; 3M Inner UPC: No Data; 3M Shipper UPC: 50051135081162; Ship Container Length: 0.304 (Meter); Ship Container Height: 0.136 (Meter); Ship Container Width: 0.244 (Meter); Ship Container Volume: 10.087 (Cubic decimeter); Ship Container Weight: 2.425 (Kilogram); Shelf Life: 730 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3506105000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 004620; NMFC Sub: 02; NMFC Class: 060.0; US DOT, 49 CFR Ground: LIMITED QUANTITY; US DOT, 49 CFR Vessel: UN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ALKYL AMINES, BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL), 8, II, LIMITED QUANTITY; International Air Transport Association (IATA): UN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ALKYL AMINES, BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL), 8, II; International Maritime Organization (IMO): UN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ALKYL AMINES, BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL), 8, II, LIMITED QUANTITY. Product Information: 3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation.. The result of years of development and testing, 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass). It is ideal for bonding quarter panels, roofs skins, box sides, van sides, utility vehicle sides and door skins – anywhere that requires a lasting bond for outer body panels, without the added time and expense of riveting or welding. In fact, adhesive bonding can be a time and money-saving replacement for many collision repair jobs that have traditionally required welding or riveting. Many interior or other adjacent parts that must be removed to avoid damage from welding can remain installed when bonding.
Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.
Efficient Application: Two-part panel bonding adhesive is available from 3M in cartridges from 50 mL to 400 mL, and works seamlessly with 3M manual applicator guns such as 08117 and the 3M pneumatic applicator gun 09930 for the 200ml cartridges. It applies quickly from the cartridge with no pre-mixing or measuring. The adhesive contains glass beads which reduces excessive squeeze-out and makes it easy to form consistent bondlines. A work time of up to two hours and the added heat-assisted on-demand curing allows for accurate application, squeeze-out sealing and cleanup. The bonding adhesive also has an excellent shelf life even after it's been opened, reducing the cost of replacing unused product.
The Benefits of Bonding vs. Welding: Bonding adhesive maximizes shop time, as it can be used quickly and conveniently for many applications where welding or riveting have traditionally been the best options. Technicians can save time by welding only where adhesive peel failure or ghost lines are a concern, and achieve better results by bonding in areas where sheet metal can warp during the welding process. You can even resistance spot weld directly through uncured adhesive for areas where a weld can add stability. The bonding adhesive contains corrosion inhibitors to resists corrosion much better than welds or rivets, helping to extend the life of the body panel repair.
Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.
Better Science for Better Bonding from 3M: 3M™ Panel Bonding Adhesive is the result of years of laboratory development and field testing. 3M scientists pioneered "bondline control" in the collision repair market, incorporating glass beads into our adhesive formula that work as built-in spacers for optimal bond line thicknesses. Our adhesive cartridges, together with our manual and pneumatic applicator guns and mixing nozzles, form a system that eliminates pre-mixing or measuring of two-part epoxies. The ability to bond effectively results in a more versatile, cost-effective shop.
