3M Sales UPC: 00021200300882; 3M 5-Digit Part Number: 30088; 3M Previous Stock Number: 62449526318; 3M Consumer UPC: 00021200300882; 3M Inner UPC: No Data; 3M Shipper UPC: 50021200300887; Ship Container Length: 25.900 (Centimeter); Ship Container Height: 24.600 (Centimeter); Ship Container Width: 25.900 (Centimeter); Ship Container Volume: 16501.926 (Cubic centimeter); Ship Container Weight: 5.565 (Kilogram); Shelf Life: 912 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3506915000; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 004620; NMFC Sub: 02; NMFC Class: 060.0; US DOT, 49 CFR Ground: LIMITED QUANTITY; US DOT, 49 CFR Vessel: UN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -017C; International Air Transport Association (IATA): UN1133, ADHESIVES, 3, II; International Maritime Organization (IMO): UN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -017C. Product Information: 3M™ High Performance Industrial Plastic Adhesive 4693H dries quickly with an open bond time of approximately 20 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water and the sun. Additionally, it bonds well to plastics, providing long-term adhesion as well as good resistance to cleaning products..
Ideal for Plastic
Our 3M™ High Performance Industrial Plastic Adhesive 4693H bonds to a variety of substrates – including most plastics – for a strong, enduring bond.
Recommended Applications
- Bonding most plastics
- Repairing plastic parts in large and small assemblies
- General industrial
- MRO
Speed Up the Bonding Process
With 3M™ High Performance Industrial Plastic Adhesive 4693H you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature that will not yellow when exposed to UV or sunlight.
Applying Your Adhesive
Whether it is being brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. The application of one coat should prove sufficient for most surfaces. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
