Product Overview

3M Sales UPC: 00021200275715; 3M 5-Digit Part Number: 27571; 3M Previous Stock Number: 70070698421; 3M Consumer UPC: No Data; 3M Inner UPC: No Data; 3M Shipper UPC: 50021200275710; Ship Container Length: 0.341 (Meter); Ship Container Height: 0.157 (Meter); Ship Container Width: 0.289 (Meter); Ship Container Volume: 15472.193 (Cubic centimeter); Ship Container Weight: 1814.300 (Gram); Shelf Life: 730 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 3824999397; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 043940; NMFC Sub: 02; NMFC Class: 085.0; US DOT, 49 CFR Ground: NOT RESTRICTED,AS PER SPECIAL PROVISION 47; US DOT, 49 CFR Vessel: NOT RESTRICTED,AS PER SPECIAL PROVISION 47; International Air Transport Association (IATA): NOT RESTRICTED,AS PER SPECIAL PROVISION A46; International Maritime Organization (IMO): NOT RESTRICTED,AS PER SPECIAL PROVISION 216. Product Information: 3M™ Adhesion Promoter 4298 is a versatile liquid primer specifically formulated for enhancing the adhesion of 3M™ Acrylic Foam Tapes to low surface energy substrates common on interior and exterior automotive trim and parts. This fast-drying adhesion promoter works with most LSE plastics including PPO, PP, PC, PC + ABS and others..

Versatile Adhesion Promoter for LSE Plastics
Formulated specifically for use with 3M™ Acrylic Foam Tapes, our 3M™ Adhesion Promoter 4298 promotes a permanent bond with a wide range of low surface energy plastics and other materials commonly used in automotive OEM. It works well with PPO, polypropylene (PP) as well as polycarbonate (PC) and PC + ABS. It dries in 30 to 90 seconds for fast and efficient application. Once it’s dry, it’s ready to accept attachment tape. The adhesion promoter can also be cleaned from most surfaces using acetone solvent. The 3M™ Adhesion Promoter 4298 is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes.

Easy to Apply and Use
3M™ Adhesion Promoter 4298 is supplied in an easy-to-use sponge applicator packet. This packet tears open easily across the top to expose the sponge applicator, and the bottom section of the packet is excellent for no-mess application. The adhesion promoter can also be applied using a gravity feed wipe, knurled roller, sprayer, or a felt-tipped or similar applicator. 3M™ Adhesion Promoter 4298 can be cleaned up with methylethyl ketone (MEK) or acetone solvents (be careful with solvents on plastics).

Recommended Applications

‎ LSE plastic trim and parts
Automotive dash and interior trim
Injection-molded side body side moldings
Automotive claddings
For use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes

Better Science for Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations - and all of it goes into each of our products for automotive OEMs and Tier Suppliers, like 3M™ Adhesion Promoter 4298.