7000001327 3M Silane Glass Treatment AP115, Clear, 4 oz Bottle, 20 Each/Case

3M Sales UPC: 00051115234781; 3M 5-Digit Part Number: 23478; 3M Previous Stock Number: 70006412681; 3M Consumer UPC: 00051115234781; 3M Inner UPC: No Data; 3M Shipper UPC: 50051115234786; Ship Container Length: 0.218 (Meter); Ship Container Height: 0.167 (Meter); Ship Container Width: 0.177 (Meter); Ship Container Volume: 6443.862 (Cubic centimeter); Ship Container Weight: 2540.000 (Gram); Shelf Life: 365 Days; Country of Origin: USA; ECCN Number: EAR99; Harmonizing Code: 2905120050;3824999310; Transport Protective Service: PROTECTIVE SERVICE NOT REQUIRED; NMFC Item: 043940; NMFC Sub: 02; NMFC Class: 085.0; US DOT, 49 CFR Ground: LIMITED QUANTITY; US DOT, 49 CFR Vessel: UN1219, ISOPROPANOL SOLUTION, 3, II, LIMITED QUANTITY, +012C; International Air Transport Association (IATA): UN1219, ISOPROPANOL SOLUTION, 3, II; International Maritime Organization (IMO): UN1219, ISOPROPANOL SOLUTION, 3, II, LIMITED QUANTITY, +012C. Product Information: 3M™ Silane Glass Treatment AP115 is an IPA based silane glass treatment that is used in conjunction with 3M™ VHB™ Tape to promote adhesion. It is easy to apply using the 4 fl. oz. spray bottle and is also available in a 1 gallon bulk bottle. It is clear in color..

Promote Adhesion to Uncoated Glass Surfaces
Our 3M™ Silane Glass Treatment AP115 is a solvent mixture of isopropyl alcohol and water that is used to increase adhesion of 3M™ VHB™ Tapes to uncoated glass surfaces. Glass surfaces are water loving in nature, which can cause issues in humid or wet environments when attempting to create a strong, long-lasting adhesive bond. Moisture can undercut the tape bondline and interfere with normal adhesion forces. 3M™ Silane Glass Treatment AP115 creates a hydrophobic surface that protects the 3M™ VHB™ Tape and bonds in even the most moist environments. Easy to apply and clear in color

Recommended Applications

• Glass treatment in wet or humid enviroments
• Construction industry

Application Instructions

1. Moisten a clean, soft absorbent, lint-free cloth with the silane solution (or spray solution onto surface) and wipe the area to be bonded in one direction. Immediately follow with a dry lint-free cloth (two-cloth method).  A thin “mono-layer” of the silane solution gives the best results.
2. The glass should be completely dry with no film residue visible.* Under normal room temperature conditions it is best to wait 1 to 2 minutes before applying the tape so that any residual moisture can evaporate.
3. Apply 3M™ VHB™ Tape within 15 minutes after treating the surface to minimize the risk of recontamination of the surface.